top of page
Screenshot 2026-09-08 144719.png
Radar rings over green storm cloud.png
Screenshot 2026-09-08 144044.png

Lightning Detection and Safety Display Boards

Yellow, Orange and Red lightning alert display board

 Equipped with state-of-the-art technology, it provides accurate and timely alerts on-site regarding the lightning danger level. With this proactive tool, you can manage risks effectively and safeguard the well-being of everyone around you during stormy weather.

With our real-time alerting service for lightning, you’ll never be caught off guard during a storm. Get immediate alerts that allow you to take swift action and protect what matters. Perfect for businesses, outdoor enthusiasts, and anyone who needs timely weather updates, our system is your trusted companion in severe weather conditions.

Alert Custom Sign Diplay Board

Real-Time Alerting

EN54-3 Type B Compliant
Precision Lightning Alerting Safety for High-Risk Areas
🎯 Protect key zones with real-time alerts:
✔️ Main Gate (Visitors & Contractors)
✔️ Workshops 

 ✔️Wash-Bays
✔️ Fuel 

✔️Explosives Depots
✔️ Crusher Plants

✔️Mine Camps
🔊 Complete Alert System:
✅ Hardware Sensor + Siren + Flashing Lights
✅ Digital Signage & Custom Logo Alert Zones
✅ EN54-3 Type B Compliant
✅ Manual and automated TEST ALERTS sent from your mobile.
✅ Auto-connects to any lightning detection network

✅Tailored to Your Site. Built for Harsh Conditions.
✅Where Precision Meets Protection.

Yellow, Orange and Red lightning alert display board
Yellow, Orange and Red lightning alert display board
Yellow, Orange and Red lightning alert display board
Yellow, Orange and Red lightning alert display board
Safety lightning alert light system
Lightning alert siren unit

Safeguard Your Staff and Equipment

Lightning Alert Display Board
Built for demanding site conditions.
Deliver clear, visible lightning alerts where your team needs them. Designed and built in Western Australia, the Lightning Alert Display Board combines high-visibility LED beacons, site-specific lightning intelligence and remote management to support your site’s lightning response procedures.
Display board
SpecificationDetails
Board dimensions 3600 × 2400 mm
Beacons: high-visibility LED beacons using green, yellow, orange, red and blue
Beacon power supply12 V DC; beacons rated for 9–36 V operation
Wind rating Region D — applies to the board only
Approximate weight 88 kg
Control box
Specification Details
Enclosure 450 × 450 × 200 mm, lockable
Earthing ; Earthed door, chassis and gland plate
Micro controller with relay outputs to operate the beacons


Approximate weight 28 kg
Power and protection
Specification Details
Power input 240 V AC
Power supply unit Rated for 88–264 V AC input, 65 W
Beacon output 12 V DC
Electrical protection 10 A residual current circuit breaker with overcurrent protection (RCBO), fitted inside the control box
Supply connection 4 m, 10 A mains lead with an Australian plug, or hardwired connection by a licensed electrician.
Areas with no electricity, solar panel system provided to a 12 volt system
External earth connection 400 mm chassis earth cable supplied
Connectivity and lightning data
SpecificationDetails
Network connectivity 4G Cat 4 outdoor router with an IP67 rating; external Wi-Fi or site Wi-Fi options
Lightning data configured to the board’s site coordinates
Remote management Remote configuration, monitoring and diagnostics.
On site test can be performed on the unit, by send a SMS with a code to check the system is operating.
Cabling and installation
SpecificationDetails
Interconnecting cable Up to 20 m of 5-core, 2.0 mm cable, enclosed in protective tubing
Connectors Harting 16-pin connectors at both ends
Mounting points Four corner mounting plates with 13 mm diameter holes
Mounting bolts M12 Grade 8.8 bolts, tightened to 53 Nm
Start-up Once installed and configured, connect the power and switch on. The board becomes operational when a network connection is established.
Australian support and service
Australian-based support
Our support team assists with configuration, troubleshooting and ongoing operation.
Remote fault diagnosis
Faults are assessed remotely first. Where replacement hardware is required, preconfigured spare modules can be shipped for on-site replacement.
Simple relocation updates
Moving the board to another location? Provide the new site coordinates so we can update its configuration remotely.
Designed and built in Sydney Australia
Locally designed and manufactured for demanding operating environments.
Important installation and operating information
The Lightning Alert Display Board is a visual aid that supports your site’s lightning management procedures. It does not replace those procedures or official warnings.
The Region D wind rating applies to the board only. The supporting structure and mounting arrangement must be assessed separately for the installation location.

Do what’s Right

Seek better Ways

Make a Difference

Focused on Safety
Precision Meets Protection

A Take Your Sites Safety To The Next Level 

Get in touch with us today    

EEKO Lightning Solutions PTY Ltd      sales@eekosolutions.com 

support@eekosolutions.com
Tel 1300 885 792

bottom of page